189 8069 5689

配置iptables防火墙(二)-创新互联

配置iptables防火墙(二)

创新互联建站专业为企业提供利川网站建设、利川做网站、利川网站设计、利川网站制作等企业网站建设、网页设计与制作、利川企业网站模板建站服务,10余年利川做网站经验,不只是建网站,更提供有价值的思路和整体网络服务。

DNAT策略的应用

1、清空所有表的防火墙

[root@s2 ~]# iptables -F

[root@s2 ~]# iptables -t nat -F

[root@s2 ~]# iptables -t raw -F

[root@s2 ~]# iptables -t mangle -F

2、在网关防火墙上 两块网卡

[root@s2 ~]# ifconfig

eth0    Link encap:Ethernet  HWaddr 00:0C:29:87:17:A0

     inet addr:192.168.10.10  Bcast:192.168.10.255  Mask:255.255.255.0

     inet6 addr: fe80::20c:29ff:fe87:17a0/64 Scope:Link

     UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

     RX packets:53 errors:0 dropped:0 overruns:0 frame:0

     TX packets:80 errors:0 dropped:0 overruns:0 carrier:0

     collisions:0 txqueuelen:1000

     RX bytes:5525 (5.3 KiB)  TX bytes:13431 (13.1 KiB)

     Interrupt:59 Base address:0x2000

eth2    Link encap:Ethernet  HWaddr 00:0C:29:87:17:AA

     inet addr:200.100.100.1  Bcast:200.100.100.255  Mask:255.255.255.0

确认网关上可以ping通内网客户机,外网 客户机

[root@s2 ~]# ping 192.168.10.3

PING 192.168.10.3 (192.168.10.3) 56(84) bytes of data.

64 bytes from 192.168.10.3: icmp_seq=1 ttl=128 time=1.22 ms

--- 192.168.10.3 ping statistics ---

1 packets transmitted, 1 received, 0% packet loss, time 0ms

rtt min/avg/max/mdev = 1.225/1.225/1.225/0.000 ms

[root@s2 ~]# ping 200.100.100.2

PING 200.100.100.2 (200.100.100.2) 56(84) bytes of data.

64 bytes from 200.100.100.2: icmp_seq=1 ttl=64 time=1.68 ms

64 bytes from 200.100.100.2: icmp_seq=2 ttl=64 time=0.375 ms

64 bytes from 200.100.100.2: icmp_seq=3 ttl=64 time=0.175 ms

--- 200.100.100.2 ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time 1999ms

rtt min/avg/max/mdev = 0.175/0.744/1.682/0.668 ms

3、确认开启路由转发

[root@s2 ~]# vi /etc/sysctl.conf

net.ipv4.ip_forward = 1

[root@s2 ~]# sysctl -p

net.ipv4.ip_forward = 1

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.default.accept_source_route = 0

kernel.sysrq = 0

kernel.core_uses_pid = 1

net.ipv4.tcp_syncookies = 1

kernel.msgmnb = 65536

kernel.msgmax = 65536

kernel.shmmax = 4294967295

kernel.shmall = 268435456

4、在网关上添加DNAT映射,对于访问网关80端口的数据包,将目标地址改为网站服务器的ip地址的内网IP地址

[root@s2 ~]# iptables -t nat -A PREROUTING -i eth1 -d 200.100.100.1 -p tcp --dport 80 -j DNAT --to-destination 192.168.10.3

5、外网用户访问内网的Web服务器测试下

配置iptables防火墙(二)

SNAT策略应用

1、清空所有表的防火墙

[root@s2 ~]# iptables -F

[root@s2 ~]# iptables -t nat -F

[root@s2 ~]# iptables -t raw -F

[root@s2 ~]# iptables -t mangle -F

2、在网关防火墙上 两块网卡

[root@s2 ~]# ifconfig

eth0    Link encap:Ethernet  HWaddr 00:0C:29:87:17:A0

     inet addr:192.168.10.10  Bcast:192.168.10.255  Mask:255.255.255.0

     inet6 addr: fe80::20c:29ff:fe87:17a0/64 Scope:Link

     UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

     RX packets:53 errors:0 dropped:0 overruns:0 frame:0

     TX packets:80 errors:0 dropped:0 overruns:0 carrier:0

     collisions:0 txqueuelen:1000

     RX bytes:5525 (5.3 KiB)  TX bytes:13431 (13.1 KiB)

     Interrupt:59 Base address:0x2000

eth2    Link encap:Ethernet  HWaddr 00:0C:29:87:17:AA

     inet addr:200.100.100.1  Bcast:200.100.100.255  Mask:255.255.255.0

确认网关上可以ping通内网客户机,外网 客户机

[root@s2 ~]# ping 192.168.10.3

PING 192.168.10.3 (192.168.10.3) 56(84) bytes of data.

64 bytes from 192.168.10.3: icmp_seq=1 ttl=128 time=1.22 ms

--- 192.168.10.3 ping statistics ---

1 packets transmitted, 1 received, 0% packet loss, time 0ms

rtt min/avg/max/mdev = 1.225/1.225/1.225/0.000 ms

[root@s2 ~]# ping 200.100.100.2

PING 200.100.100.2 (200.100.100.2) 56(84) bytes of data.

64 bytes from 200.100.100.2: icmp_seq=1 ttl=64 time=1.68 ms

64 bytes from 200.100.100.2: icmp_seq=2 ttl=64 time=0.375 ms

64 bytes from 200.100.100.2: icmp_seq=3 ttl=64 time=0.175 ms

--- 200.100.100.2 ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time 1999ms

rtt min/avg/max/mdev = 0.175/0.744/1.682/0.668 ms

3、确认开启路由转发

[root@s2 ~]# vi /etc/sysctl.conf

net.ipv4.ip_forward = 1

[root@s2 ~]# sysctl -p

net.ipv4.ip_forward = 1

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.default.accept_source_route = 0

kernel.sysrq = 0

kernel.core_uses_pid = 1

net.ipv4.tcp_syncookies = 1

kernel.msgmnb = 65536

kernel.msgmax = 65536

kernel.shmmax = 4294967295

kernel.shmall = 268435456

6、为局域网访问Internet的数据的包采用SNAT策略,将源地址更改为服务器的公网的IP

地址

[root@s2 ~]# iptables -t nat -A POSTROUTING -s 192.168.10.0/24 -j SNAT --to-source 200.100.100.1

7、内网客户机访问外网Web服务器测试

配置iptables防火墙(二)

另外有需要云服务器可以了解下创新互联scvps.cn,海内外云服务器15元起步,三天无理由+7*72小时售后在线,公司持有idc许可证,提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案,具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势,专为企业上云打造定制,能够满足用户丰富、多元化的应用场景需求。


分享题目:配置iptables防火墙(二)-创新互联
本文网址:http://cdxtjz.cn/article/dshpss.html

其他资讯