下文给大家带来实现keepalived双主模型lvs高可用集群的实验总结，希望能够给大家在实际运用中带来一定的帮助，负载均衡涉及的东西比较多，理论也不多，网上有很多书籍，今天我们就用创新互联在行业内累计的经验来做一个解答。
创新互联公司服务项目包括承留网站建设、承留网站制作、承留网页制作以及承留网络营销策划等。多年来，我们专注于互联网行业，利用自身积累的技术优势、行业经验、深度合作伙伴关系等，向广大中小型企业、政府机构等提供互联网行业的解决方案，承留网站推广取得了明显的社会效益与经济效益。目前，我们服务的客户以成都为中心已经辐射到承留省份的部分城市，未来相信会继续扩大服务区域并继续获得客户的支持与信任！
实现keepalived双主模型lvs高可用集群
一、拓扑图
二、环境准备
两台负载均衡调度器，两台web云服务器。
调度器A环境:
VS:一张网卡
DIP:192.168.0.7/24
VIP（主）：192.168.0.200
VIP(备)：192.168.0.201
软件包：yum install -y keepalived ipvsadm nginx(作用：sorry-server服务)
调度器B环境：
VS:一张网卡
DIP:192.168.0.8/24
VIP（主）：192.168.0.201
VIP(备)：192.168.0.200
软件包：yum install -y keepalived ipvsadm nginx(作用：sorry-server服务)
web服务器A环境：
RS1:192.168.0.3
lo:0:192.168.0.200
lo:1:192.168.0.201
软件包：yum install -y httpd
web服务器B环境：
RS1:192.168.0.4
lo:0:192.168.0.200
lo:1:192.168.0.201
软件包：yum install -y httpd
三、配置
调度器A配置
主要操作：ip配置，时间同步、hosts文件更改，修改主机名（确保主从节点能够通信）、keepalived.conf配置文件更改，通知脚本配置(两个脚本)，ipvsadm规则查看
ip配置
[root@node1keepalived]# ip a
1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:0c:d2:06 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.7/24 brd 192.168.0.255 scope global ens33
valid_lft forever preferred_lft forever
inet 192.168.0.200/24 scope global secondary ens33:1
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe0c:d206/64 scope link
valid_lft forever preferred_lft forever
时间同步
ntpdate ntp-server-ip #时间服务器的ip
hosts文件
[root@node1 keepalived]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 node1
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 node1
192.168.0.8 node2
192.168.0.7 node1
主机名修改
hostnamectl set-hostname node1
keepalived.conf配置文件更改
[root@localhost keepalived]# cat keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 10
router_id node1
vrrp_mcast_group4 224.0.0.223
}
vrrp_instance VI_1 {
state MASTER
interface ens33
virtual_router_id 51
priority 110
advert_int 1
authentication {
auth_type PASS
auth_pass JzvnmfkY
}
virtual_ipaddress {
192.168.0.200/24 dev ens33 label ens33:1
}
notify_master "/etc/keepalived/notify1.sh master"
notify_backup "/etc/keepalived/notify1.sh backup"
notify_fault "/etc/keepalived/notify1.sh fault"
}
virtual_server 192.168.0.200 80 {
delay_loop 3
lb_algo wrr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.0.3 80 {
weight 2
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.0.4 80 {
weight 1
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
vrrp_instance VI_2 {
state BACKUP
interface ens33
virtual_router_id 52
priority 90
advert_int 1
authentication {
auth_type PASS
auth_pass JzvnmfkY
}
virtual_ipaddress {
192.168.0.201/24 dev ens33 label ens33:2
}
notify_master "/etc/keepalived/notify2.sh master"
notify_backup "/etc/keepalived/notify2.sh backup"
notify_fault "/etc/keepalived/notify2.sh fault"
}
virtual_server 192.168.0.201 80 {
delay_loop 3
lb_algo wrr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.0.3 80 {
weight 1
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.0.4 80 {
weight 2
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
} 通知脚本配置
脚本1
[root@node1 keepalived]# cat notify1.sh
#!/bin/bash
#description: An example of notify script
#
vip=192.168.0.200
contact='root@localhost'
notify(){
local mailsubject="$(hostname) to be $1:$vip floating"
local mailbody="$(date +'%F %T'):vrrp1 transition,$(hostname) changed to be $1"
echo "$mailbody" | mail -s "$mailsubject" $contact
}
case $1 in
master)
notify master
;;
backup)
notify backup
;;
fault)
notify fault
;;
*)
echo "Usage:$(basename $0) {master|backup|fault}"
exit 1
;;
esac 脚本2
[root@node1 keepalived]# cat notify2.sh
#!/bin/bash
#description: An example of notify script
#
vip=192.168.0.201
contact='root@localhost'
notify(){
local mailsubject="$(hostname) to be $1:$vip floating"
local mailbody="$(date +'%F %T'):vrrp2 transition,$(hostname) changed to be $1"
echo "$mailbody" | mail -s "$mailsubject" $contact
}
case $1 in
master)
notify master
;;
backup)
notify backup
;;
fault)
notify fault
;;
*)
echo "Usage:$(basename $0) {master|backup|fault}"
exit 1
;;
esac ipvsadm规则查看
[root@node1 keepalived]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.0.200:80 wrr
-> 192.168.0.3:80 Route 2 0 0
-> 192.168.0.4:80 Route 1 0 0
TCP 192.168.0.201:80 wrr
-> 192.168.0.3:80 Route 1 0 0
-> 192.168.0.4:80 Route 2 0 0
调度器B配置
主要操作：ip配置，时间同步、hosts文件更改，修改主机名（确保主从节点能够通信）、keepalived.conf配置文件更改，通知脚本配置(两个脚本)，ipvsadm规则查看
ip配置
[root@node2 keepalived]# ip a
1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:3f:e3:9e brd ff:ff:ff:ff:ff:ff
inet 192.168.0.8/24 brd 192.168.0.255 scope global ens33
valid_lft forever preferred_lft forever
inet 192.168.0.201/24 scope global secondary ens33:2
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe3f:e39e/64 scope link
valid_lft forever preferred_lft forever
时间同步
ntpdate ntp-server-ip
hosts文件更改
[root@node2 keepalived]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 node2
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 node2
192.168.0.7 node1
192.168.0.8 node2
主机名修改
hostnamectl set-hostname node2
keepalived.conf配置文件更改
[root@localhost keepalived]# cat keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
root@localhost
}
notification_email_from keepalived@localhost
smtp_server 127.0.0.1
smtp_connect_timeout 10
router_id node2
vrrp_mcast_group4 224.0.0.223
}
vrrp_instance VI_1 {
state BACKUP
interface ens33
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass JzvnmfkY
}
virtual_ipaddress {
192.168.0.200/24 dev ens33 label ens33:1
}
notify_master "/etc/keepalived/notify1.sh master"
notify_backup "/etc/keepalived/notify1.sh backup"
notify_fault "/etc/keepalived/notify1.sh fault"
}
virtual_server 192.168.0.200 80 {
delay_loop 3
lb_algo wrr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.0.3 80 {
weight 2
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.0.4 80 {
weight 1
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
}
vrrp_instance VI_2 {
state MASTER
interface ens33
virtual_router_id 52
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass JzvnmfkY
}
virtual_ipaddress {
192.168.0.201/24 dev ens33 label ens33:2
}
notify_master "/etc/keepalived/notify2.sh master"
notify_backup "/etc/keepalived/notify2.sh backup"
notify_fault "/etc/keepalived/notify2.sh fault"
}
virtual_server 192.168.0.201 80 {
delay_loop 3
lb_algo wrr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80
real_server 192.168.0.3 80 {
weight 1
HTTP_GET {
url {
path /
status_code 200
}
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
real_server 192.168.0.4 80 {
weight 2
HTTP_GET {
url {
path /
status_code 200
}
connect_timeout 3
nb_get_retry 3
delay_before_retry 3
}
}
} 通知脚本配置(同调度器A的脚本一致)
脚本1
[root@node2 keepalived]# cat notify1.sh
#!/bin/bash
#description: An example of notify script
#
vip=192.168.0.200
contact='root@localhost'
notify(){
local mailsubject="$(hostname) to be $1:$vip floating"
local mailbody="$(date +'%F %T'):vrrp1 transition,$(hostname) changed to be $1"
echo "$mailbody" | mail -s "$mailsubject" $contact
}
case $1 in
master)
notify master
;;
backup)
notify backup
;;
fault)
notify fault
;;
*)
echo "Usage:$(basename $0) {master|backup|fault}"
exit 1
;;
esac 脚本2
[root@node2 keepalived]# cat notify2.sh
#!/bin/bash
#description: An example of notify script
#
vip=192.168.0.201
contact='root@localhost'
notify(){
local mailsubject="$(hostname) to be $1:$vip floating"
local mailbody="$(date +'%F %T'):vrrp2 transition,$(hostname) changed to be $1"
echo "$mailbody" | mail -s "$mailsubject" $contact
}
case $1 in
master)
notify master
;;
backup)
notify backup
;;
fault)
notify fault
;;
*)
echo "Usage:$(basename $0) {master|backup|fault}"
exit 1
;;
esacweb服务器A配置
ip配置
1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.168.0.201/32 brd 192.168.0.201 scope global lo:1
valid_lft forever preferred_lft forever
inet 192.168.0.200/32 brd 192.168.0.200 scope global lo:0
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:ab:50:14 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.4/24 brd 192.168.0.255 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:feab:5014/64 scope link
valid_lft forever preferred_lft forever
lvs-dr-预配置脚本
脚本1
[root@localhost ~]# cat vip200-setrs.sh
#!/bin/bash
#
vip=192.168.0.200
mask='255.255.255.255'
case $1 in
start)
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
ifconfig lo:0 $vip netmask $mask broadcast $vip up
route add -host $vip dev lo:0
;;
stop)
ifconfig lo:0 down
echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
;;
*)
echo "Usage $(basename $0) start|stop"
exit 1
;;
esac
脚本2
[root@localhost ~]# cat vip201-setrs.sh
#!/bin/bash
#
vip=192.168.0.201
mask='255.255.255.255'
case $1 in
start)
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
ifconfig lo:1 $vip netmask $mask broadcast $vip up
route add -host $vip dev lo:1
;;
stop)
ifconfig lo:1 down
echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
;;
*)
echo "Usage $(basename $0) start|stop"
exit 1
;;
esac
web服务器B配置
ip配置
[root@localhost ~]# ip a
1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.168.0.201/32 brd 192.168.0.201 scope global lo:1
valid_lft forever preferred_lft forever
inet 192.168.0.200/32 brd 192.168.0.200 scope global lo:0
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:ab:50:14 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.4/24 brd 192.168.0.255 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:feab:5014/64 scope link
valid_lft forever preferred_lft forever
lvs-dr-预设脚本
脚本内容同web服务A相同，拷贝过去即可
vip200-setrs.sh vip201-setrs.sh
客户端测试
ip配置
[root@localhost ~]# ip a
1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:d0:37:77 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.14/24 brd 192.168.0.255 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fed0:3777/64 scope link
valid_lft forever preferred_lft forever
curl测试
[root@localhost ~]# for i in {1..10};do curl http://192.168.0.200;done
backend server1
backend server1
backend server2
backend server1
backend server1
backend server2
backend server1
backend server1
backend server2
backend server1
[root@localhost ~]# for i in {1..10};do curl http://192.168.0.201;done
backend server1
backend server2
backend server2
backend server1
backend server2
backend server2
backend server1
backend server2
backend server2
backend server1 四、健康状态查看以及故障排查参考方式
方式1：查看keepalived的切换过程
systemctl status keepalived
方式2：mail命令查看邮件
方式3：查看web服务器日志
tail /var/log/httpd/access_log
tail /var/log/httpd/error_log
五、模拟故障
1.模拟调度器B故障
调度器B上操作
停止keepalived服务
systemctl stop keepalived
[root@node2 keepalived]# systemctl status keepalived #分析以下信息，VIP2已移除
Jul 02 10:18:53 node2 systemd[1]: Stopping LVS and VRRP High Availability Monitor...
Jul 02 10:18:53 node2 Keepalived_vrrp[50773]: VRRP_Instance(VI_2) sending 0 priority
Jul 02 10:18:53 node2 Keepalived_vrrp[50773]: VRRP_Instance(VI_2) removing protocol VIPs.
Jul 02 10:18:53 node2 systemd[1]: Stopped LVS and VRRP High Availability Monitor.
查看ip
[root@node2 keepalived]# ip a #VIP2移除
1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:3f:e3:9e brd ff:ff:ff:ff:ff:ff
inet 192.168.0.8/24 brd 192.168.0.255 scope global ens33
valid_lft forever preferred_lft forever
inet6 fe80::20c:29ff:fe3f:e39e/64 scope link
valid_lft forever preferred_lft forever
调度器A操作
[root@node1 keepalived]# systemctl status keepalived #分析以下信息，可知VIP漂移到调度A
● keepalived.service - LVS and VRRP High Availability Monitor
Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disabled)
Active: active (running) since Sun 2017-07-02 10:07:36 CST; 17min ago
Process: 20019 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)
Main PID: 20020 (keepalived)
CGroup: /system.slice/keepalived.service
├─20020 /usr/sbin/keepalived -D
├─20021 /usr/sbin/keepalived -D
└─20022 /usr/sbin/keepalived -D
Jul 02 10:07:37 node1 Keepalived_vrrp[20022]: Opening script file /etc/keepalived/notify1.sh
Jul 02 10:07:37 node1 Keepalived_healthcheckers[20021]: Netlink reflector reports IP 192.168.0.200 added
Jul 02 10:07:42 node1 Keepalived_vrrp[20022]: VRRP_Instance(VI_1) Sending gratuitous ARPs on ens33 for 192.168.0.200
Jul 02 10:18:54 node1 Keepalived_vrrp[20022]: VRRP_Instance(VI_2) Transition to MASTER STATE
Jul 02 10:18:55 node1 Keepalived_vrrp[20022]: VRRP_Instance(VI_2) Entering MASTER STATE
Jul 02 10:18:55 node1 Keepalived_vrrp[20022]: VRRP_Instance(VI_2) setting protocol VIPs.
Jul 02 10:18:55 node1 Keepalived_vrrp[20022]: VRRP_Instance(VI_2) Sending gratuitous ARPs on ens33 for 192.168.0.201
Jul 02 10:18:55 node1 Keepalived_vrrp[20022]: Opening script file /etc/keepalived/notify2.sh
Jul 02 10:18:55 node1 Keepalived_healthcheckers[20021]: Netlink reflector reports IP 192.168.0.201 added
Jul 02 10:19:00 node1 Keepalived_vrrp[20022]: VRRP_Instance(VI_2) Sending gratuitous ARPs on ens33 for 192.168.0.201
查看邮件
[root@node1 keepalived]# mail #node1成为VIP192.168.0.201的主节点
Heirloom Mail version 12.5 7/5/10. Type ? for help.
"/var/spool/mail/root": 1 message
> 1 root Sun Jul 2 10:18 19/702 "node1 to be master:192.168.0.201 floating"
& 1
Message 1:
From root@node1.localdomain Sun Jul 2 10:18:55 2017
Return-Path:
X-Original-To: root@localhost
Delivered-To: root@localhost.localdomain
Date: Sun, 02 Jul 2017 10:18:55 +0800
To: root@localhost.localdomain
Subject: node1 to be master:192.168.0.201 floating
User-Agent: Heirloom mailx 12.5 7/5/10
Content-Type: text/plain; charset=us-ascii
From: root@node1.localdomain (root)
Status: RO
2017-07-02 10:18:55:vrrp2 transition,node1 changed to be master
2.模拟web服务器A故障(RS1)
webA上操作
[root@localhost ~]# systemctl stop httpd
调度器A上操作
查看邮件
[root@node1 keepalived]# mail #分析以下信息，可知RS1宕机
Heirloom Mail version 12.5 7/5/10. Type ? for help.
"/var/spool/mail/root": 4 messages 2 new
1 root Sun Jul 2 10:18 19/702 "node1 to be master:192.168.0.201 floating"
2 root Sun Jul 2 10:28 19/702 "node1 to be backup:192.168.0.201 floating"
>N 3 keepalived@localhost Sun Jul 2 10:28 17/642 "[node1] Realserver [192.168.0.3]:80 - DOWN"
N 4 keepalived@localhost Sun Jul 2 10:28 17/642 "[node1] Realserver [192.168.0.3]:80 - DOWN"
客户端请求查看
[root@localhost ~]# curl http://192.168.0.200 #只能访问到RS2
backend server2
调度器B上操作
[root@node2 keepalived]# mail #分析以下信息，可知RS1宕机
Heirloom Mail version 12.5 7/5/10. Type ? for help.
"/var/spool/mail/root": 4 messages 2 new
1 root Sun Jul 2 10:28 19/702 "node2 to be backup:192.168.0.200 floating"
2 root Sun Jul 2 10:28 19/702 "node2 to be master:192.168.0.201 floating"
>N 3 keepalived@localhost Sun Jul 2 10:28 17/642 "[node2] Realserver [192.168.0.3]:80 - DOWN"
N 4 keepalived@localhost Sun Jul 2 10:28 17/642 "[node2] Realserver [192.168.0.3]:80 - DOWN"
3.模拟web服务双机故障
RS1和RS2停止web服务
调度器A上操作
查看邮件 #分析以下信息，可知双机宕机
[root@node1 keepalived]# mail
Heirloom Mail version 12.5 7/5/10. Type ? for help.
"/var/spool/mail/root": 6 messages 2 new
1 root Sun Jul 2 10:18 19/702 "node1 to be master:192.168.0.201 floating"
2 root Sun Jul 2 10:28 19/702 "node1 to be backup:192.168.0.201 floating"
3 keepalived@localhost Sun Jul 2 10:28 18/653 "[node1] Realserver [192.168.0.3]:80 - DOWN"
4 keepalived@localhost Sun Jul 2 10:28 18/653 "[node1] Realserver [192.168.0.3]:80 - DOWN"
>N 5 keepalived@localhost Sun Jul 2 10:36 17/642 "[node1] Realserver [192.168.0.4]:80 - DOWN"
N 6 keepalived@localhost Sun Jul 2 10:36 17/642 "[node1] Realserver [192.168.0.4]:80 - DOWN"
查看keepalived状态
[root@node1 keepalived]# systemctl status keepalived #分析以下信息，双机宕机，启动sorry服务器
● keepalived.service - LVS and VRRP High Availability Monitor
Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disabled)
Active: active (running) since Sun 2017-07-02 10:07:36 CST; 30min ago
Process: 20019 ExecStart=/usr/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)
Main PID: 20020 (keepalived)
CGroup: /system.slice/keepalived.service
├─20020 /usr/sbin/keepalived -D
├─20021 /usr/sbin/keepalived -D
└─20022 /usr/sbin/keepalived -D
Jul 02 10:36:31 node1 Keepalived_healthcheckers[20021]: Removing alive servers from the pool for VS [192.168.0.200]:80
Jul 02 10:36:31 node1 Keepalived_healthcheckers[20021]: Remote SMTP server [127.0.0.1]:25 connected.
Jul 02 10:36:31 node1 Keepalived_healthcheckers[20021]: SMTP alert successfully sent.
Jul 02 10:36:32 node1 Keepalived_healthcheckers[20021]: Error connecting server [192.168.0.4]:80.
Jul 02 10:36:32 node1 Keepalived_healthcheckers[20021]: Removing service [192.168.0.4]:80 from VS [192.168.0.201]:80
Jul 02 10:36:32 node1 Keepalived_healthcheckers[20021]: Lost quorum 1-0=1 > 0 for VS [192.168.0.201]:80
Jul 02 10:36:32 node1 Keepalived_healthcheckers[20021]: Adding sorry server [127.0.0.1]:80 to VS [192.168.0.201]:80
Jul 02 10:36:32 node1 Keepalived_healthcheckers[20021]: Removing alive servers from the pool for VS [192.168.0.201]:80
Jul 02 10:36:32 node1 Keepalived_healthcheckers[20021]: Remote SMTP server [127.0.0.1]:25 connected.
Jul 02 10:36:32 node1 Keepalived_healthcheckers[20021]: SMTP alert successfully sent.
客户端请求
[root@localhost ~]# curl http://192.168.0.201 #请求至sorry服务器的web页面
sorry server
[root@localhost ~]# curl http://192.168.0.200
sorry server
看了以上关于实现keepalived双主模型lvs高可用集群的实验总结，如果大家还有什么地方需要了解的可以在创新互联行业资讯里查找自己感兴趣的或者找我们的专业技术工程师解答的，创新互联技术工程师在行业内拥有十几年的经验了。
网页题目：实现keepalived双主模型lvs高可用集群的实验总结
URL链接：
http://cdxtjz.cn/article/pphshj.html
