189 8069 5689

Docker怎么快速搭建Redis集群

服务器

小编这次要给大家分享的是Docker怎么快速搭建Redis集群,文章内容丰富,感兴趣的小伙伴可以来了解一下,希望大家阅读完这篇文章之后能够有所收获。

创新互联公司专业为企业提供广河网站建设、广河做网站、广河网站设计、广河网站制作等企业网站建设、网页设计与制作、广河企业网站模板建站服务,10多年广河做网站经验,不只是建网站,更提供有价值的思路和整体网络服务。

什么是Redis集群

Redis集群是Redis提供的分布式数据库方案,集群通过分片(sharding)来进行数据共享,并提供复制和故障转移功能。

节点

一个Redis集群通常由多个节点(node)组成,在刚开始的时候,每个节点都是相互独立的,它们都处于一个只包含自己的集群当中,要组建一个真正可工作的集群,我们必须将各个独立的节点连接起来,构成一个包含多个节点的集群。

集群配置

配置文件

调整 CLUSTER 节点配置

# 开启cluster集群
cluster-enabled yes

# 集群配置文件
cluster-config-file nodes-6379.conf

# 集群节点超时
cluster-node-timeout 15000

Docker快速搭建Redis集群

安装Redis

参考文章:https://www.jb51.net/article/150054.htm

准备工作

├── conf
│  ├── redis.conf
│  └── sentinel.conf
├── redis
│  ├── data_6379
│  ├── data_6380
│  ├── data_6381
│  ├── data_6382
│  ├── data_6383
│  └── data_6384
└── scripts
  ├── cluster.sh
  ├── run.sh
  └── sentinel.sh

run.sh 脚本文件

#!/usr/bin/env bash
set -e

# 脚本当前目录
cPath=$(cd $(dirname "$0") || exit; pwd)

# 根目录
dirPath=$(dirname "$cPath")

# 获取端口
port="$1"
if [[ ! "$port" ]]; then
 port=6379
fi

# 创建数据目录
mkdir -p "$dirPath"/redis/data_"$port"

# 删除已启动服务
containerId=$(docker ps -a | grep "redis_$port" | awk -F' ' '{print $1}')
if [[ "$containerId" ]]; then
  docker rm -f ${containerId} > /dev/null
fi

# 启动服务
containerName=redis_"$port"
docker run -itd --privileged=true -p "$port":6379 --name ${containerName} \\
-v="$dirPath"/conf/redis.conf:/etc/redis/redis.conf \\
-v="$dirPath"/redis/data_"$port":/data \\
redis \\
redis-server /etc/redis/redis.conf > /dev/null

# 获取容器IP地址
dockerIp=$(docker inspect -f "{{.NetworkSettings.IPAddress}}" "$containerName")

# 获取容器启动状态
isRunning=$(docker inspect -f "{{.State.Running}}" "$containerName")
if [[ "$isRunning" == "true" ]]; then
  echo "容器:$containerName - IP:$dockerIp - 启动成功"
fi

cluster.sh 脚本文件

#!/usr/bin/env bash
set -e

# 脚本当前目录
cPath=$(cd $(dirname "$0") || exit; pwd)

# 启动集群数量
num="$1"
if [[ ! "$num" ]]; then
 num=6
fi

sPort=6378
for((i=1;i<=$num;i++)); do
  sh ${cPath}/run.sh $(($sPort+$i))
done

启动服务

执行脚本文件,默认创建6个节点

sh scripts/cluster.sh

脚本返回结果

容器:redis_6379 - IP:172.17.0.2 - 启动成功
容器:redis_6380 - IP:172.17.0.3 - 启动成功
容器:redis_6381 - IP:172.17.0.4 - 启动成功
容器:redis_6382 - IP:172.17.0.5 - 启动成功
容器:redis_6383 - IP:172.17.0.6 - 启动成功
容器:redis_6384 - IP:172.17.0.7 - 启动成功

执行 docker ps 确实是否启动成功

root@DESKTOP-Q13EI52:~/docker-config/redis# docker ps
CONTAINER ID    IMAGE        COMMAND         CREATED       STATUS       PORTS          NAMES
c0601df1a456    redis        "docker-entrypoint.s…"  27 seconds ago   Up 26 seconds    0.0.0.0:6384->6379/tcp  redis_6384
6fecf70465b8    redis        "docker-entrypoint.s…"  27 seconds ago   Up 26 seconds    0.0.0.0:6383->6379/tcp  redis_6383
1af15e90b7a0    redis        "docker-entrypoint.s…"  28 seconds ago   Up 27 seconds    0.0.0.0:6382->6379/tcp  redis_6382
6c495f31a5df    redis        "docker-entrypoint.s…"  28 seconds ago   Up 28 seconds    0.0.0.0:6381->6379/tcp  redis_6381
e54fd9fd0550    redis        "docker-entrypoint.s…"  29 seconds ago   Up 28 seconds    0.0.0.0:6380->6379/tcp  redis_6380
be92ad2f7046    redis        "docker-entrypoint.s…"  29 seconds ago   Up 29 seconds    0.0.0.0:6379->6379/tcp  redis_6379

到此为止,6个独立集群节点创建完毕,目前还无法正常工作。

创建集群

此处可以跳过,本人是为了省事

获取容器为redis_开始所有的容器IP地址

docker inspect -f "{{.NetworkSettings.IPAddress}}:6379" `docker ps | grep redis_ | awk -F' ' '{print $1}'` | sort |xargs | sed 's/ /, /g'

# 返回结果
# 172.17.0.2:6379, 172.17.0.3:6379, 172.17.0.4:6379, 172.17.0.5:6379, 172.17.0.6:6379, 172.17.0.7:6379

初次创建集群执行

./redis-cli --cluster create 172.17.0.2:6379, 172.17.0.3:6379, 172.17.0.4:6379, 172.17.0.5:6379, 172.17.0.6:6379, 172.17.0.7:6379 --cluster-replicas 1

输出结果

licas 1
>>> Performing hash slots allocation on 6 nodes...
Master[0] -> Slots 0 - 5460
Master[1] -> Slots 5461 - 10922
Master[2] -> Slots 10923 - 16383
Adding replica 172.17.0.6:6379 to 172.17.0.2:6379
Adding replica 172.17.0.7:6379 to 172.17.0.3:6379
Adding replica 172.17.0.5:6379 to 172.17.0.4:6379
M: e8da1fef656984de3ec2a677edc8d9c48d01cd95 172.17.0.2:6379
  slots:[0-5460] (5461 slots) master
M: 68b925ab0fbbc1a632c1754587fb6dad3fa14c91 172.17.0.3:6379
  slots:[5461-10922] (5462 slots) master
M: 0a46ab2f6d176738b55fe699c2df1c34f8200d06 172.17.0.4:6379
  slots:[10923-16383] (5461 slots) master
S: bd3064ad5297dfc258e9236943455c589be8b2a3 172.17.0.5:6379
  replicates 0a46ab2f6d176738b55fe699c2df1c34f8200d06
S: f1d8c897882d29e6538b1158525493b3b782289a 172.17.0.6:6379
  replicates e8da1fef656984de3ec2a677edc8d9c48d01cd95
S: 619e1cb52f39e07b321719b77fc3631fa6293cef 172.17.0.7:6379
  replicates 68b925ab0fbbc1a632c1754587fb6dad3fa14c91
Can I set the above configuration? (type 'yes' to accept):

输入:yes,将平均分配槽位

>>> Nodes configuration updated
>>> Assign a different config epoch to each node
>>> Sending CLUSTER MEET messages to join the cluster
Waiting for the cluster to join
.....
>>> Performing Cluster Check (using node 172.17.0.2:6379)
M: e8da1fef656984de3ec2a677edc8d9c48d01cd95 172.17.0.2:6379
  slots:[0-5460] (5461 slots) master
  1 additional replica(s)
S: f1d8c897882d29e6538b1158525493b3b782289a 172.17.0.6:6379
  slots: (0 slots) slave
  replicates e8da1fef656984de3ec2a677edc8d9c48d01cd95
S: bd3064ad5297dfc258e9236943455c589be8b2a3 172.17.0.5:6379
  slots: (0 slots) slave
  replicates 0a46ab2f6d176738b55fe699c2df1c34f8200d06
M: 0a46ab2f6d176738b55fe699c2df1c34f8200d06 172.17.0.4:6379
  slots:[10923-16383] (5461 slots) master
  1 additional replica(s)
S: 619e1cb52f39e07b321719b77fc3631fa6293cef 172.17.0.7:6379
  slots: (0 slots) slave
  replicates 68b925ab0fbbc1a632c1754587fb6dad3fa14c91
M: 68b925ab0fbbc1a632c1754587fb6dad3fa14c91 172.17.0.3:6379
  slots:[5461-10922] (5462 slots) master
  1 additional replica(s)
[OK] All nodes agree about slots configuration.
>>> Check for open slots...
>>> Check slots coverage...
[OK] All 16384 slots covered.

连接集群

通过客户端连接

redis-cli -c <端口>

执行命令:cluster info

127.0.0.1:6379> cluster info
cluster_state:ok
cluster_slots_assigned:16384
cluster_slots_ok:16384
cluster_slots_pfail:0
cluster_slots_fail:0
cluster_known_nodes:6
cluster_size:3
cluster_current_epoch:6
cluster_my_epoch:1
cluster_stats_messages_ping_sent:104
cluster_stats_messages_pong_sent:120
cluster_stats_messages_sent:224
cluster_stats_messages_ping_received:115
cluster_stats_messages_pong_received:104
cluster_stats_messages_meet_received:5
cluster_stats_messages_received:224

看到:cluster_state:ok 说明集群已可以正常工作

客户端控制台:cluster help

127.0.0.1:6379> cluster help
 1) CLUSTER  arg arg ... arg. Subcommands are:
 2) ADDSLOTS  [slot ...] -- Assign slots to current node.
 3) BUMPEPOCH -- Advance the cluster config epoch.
 4) COUNT-failure-reports  -- Return number of failure reports for .
 5) COUNTKEYSINSLOT  - Return the number of keys in .
 6) DELSLOTS  [slot ...] -- Delete slots information from current node.
 7) FAILOVER [force|takeover] -- Promote current replica node to being a master.
 8) FORGET  -- Remove a node from the cluster.
 9) GETKEYSINSLOT   -- Return key names stored by current node in a slot.
10) FLUSHSLOTS -- Delete current node own slots information.
11) INFO - Return information about the cluster.
12) KEYSLOT  -- Return the hash slot for .
13) MEET   [bus-port] -- Connect nodes into a working cluster.
14) MYID -- Return the node id.
15) NODES -- Return cluster configuration seen by node. Output format:
16)            ... 
17) REPLICATE  -- Configure current node as replica to .
18) RESET [hard|soft] -- Reset current node (default: soft).
19) SET-config-epoch  - Set config epoch of current node.
20) SETSLOT  (importing|migrating|stable|node ) -- Set slot state.
21) REPLICAS  -- Return  replicas.
22) SAVECONFIG - Force saving cluster configuration on disk.
23) SLOTS -- Return information about slots range mappings. Each range is made of:
24)   start, end, master and replicas IP addresses, ports and ids

查看客户端提供的集群相关命令:redis-cli --cluster help

Cluster Manager Commands:
 create     host1:port1 ... hostN:portN
         --cluster-replicas 
 check     host:port
         --cluster-search-multiple-owners
 info      host:port
 fix      host:port
         --cluster-search-multiple-owners
 reshard    host:port
         --cluster-from 
         --cluster-to 
         --cluster-slots 
         --cluster-yes
         --cluster-timeout 
         --cluster-pipeline 
         --cluster-replace
 rebalance   host:port
         --cluster-weight 
         --cluster-use-empty-masters
         --cluster-timeout 
         --cluster-simulate
         --cluster-pipeline 
         --cluster-threshold 
         --cluster-replace
 add-node    new_host:new_port existing_host:existing_port
         --cluster-slave
         --cluster-master-id 
 del-node    host:port node_id
 call      host:port command arg arg .. arg
 set-timeout  host:port milliseconds
 import     host:port
         --cluster-from 
         --cluster-copy
         --cluster-replace

看完这篇关于Docker怎么快速搭建Redis集群的文章,如果觉得文章内容写得不错的话,可以把它分享出去给更多人看到。


名称栏目:Docker怎么快速搭建Redis集群
网站链接:http://cdxtjz.cn/article/cpjepg.html

其他资讯