189 8069 5689
MySQL高可用目前有heartbeat+drbd、MHA、MySQL复制等几种较成熟的方案，heartbeat+drbd的方案可扩展性较差，而且读写都由主服务器负责，从库并不提供读功能，适合于数据增长量不大、一致性要求很高的环境，如银行、金融业等。今天重点讲下MHA的高可用架构。
MHA是一款优秀的高可用环境下故障切换和主从提升的高可用软件。在MySQL故障切换过程中，MHA能做到0-30秒之内自动完成数据库的故障切换，并且在切换的过程中，大限度的保证数据的一致性，以达到真正意义上的高可用。MHA高可用建立在MySQL主从复制的基础上，先了解下MySQL复制最常见的两种方式：
异步复制：主库写入并提交事务之后，把记录写进主库二进制日志即返回客户端，主库和从库的数据存在一定的延迟，这样就存在一定的隐患，当主库提交了一个事务，并且写入了二进制日志，而从库尚未得到主库推送的二进制日志时，此时主库宕机，将造成主从服务器的数据不一致。
半同步复制：主库在每次提交事务成功时，并不及时反馈给客户端，而是等待其中一个从库也接收到二进制日志并写入中继日志之后，才返回操作成功给客户端。
MHA组成：
MHA Manager：管理节点，可以单独的部署在一台独立的服务器上，管理多个master-slave集群，也可以部署在一台Slave上。
MHA Node：数据节点，运行在每台MySQL服务器上。
MHA Manager会定时探测集群中的master节点，当master出现故障时，它可以自动将最新数据的slave提升为新master，然后将其它所有的slave重新指向新的master。整个故障转移过程对应用程序是完全透明的。
MHA工作原理：
1）从宕机的master保存二进制日志事件
2）识别含有最新更新的Slave
3) 应用差异的中继日志到其它从服务器
4）应用从master保存的二进制日志事件
5）提升一个新的Slave为master
6）使其它的Slave连接到新的master并复制
示例：MHA高可用架构（如果在内网可以关闭防火墙，否则请开启相应的端口）
Manager:node1：192.168.154.128
Master：node2：192.168.154.156
Slave：node3：192.168.154.130
Slave：node4：192.168.154.154
一 配置主从复制：
1）主节点：
[root@node2 ~]# vim /etc/my.cnf
innodb_file_per_table=1 #开启独立的表空间
skip_name_resolve #禁止域名解析
log-bin=master-bin
relay-log=relay-bin
server-id=1
[root@node2 ~]# service mysqld restart
查看二进制日志信息
mysql> show master status;
+-------------------+----------+--------------+------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB |
+-------------------+----------+--------------+------------------+
| master-bin.000001 | 106 | | |
+-------------------+----------+--------------+------------------+
1 row in set (0.00 sec)
建立授权用户：
mysql> grant replication slave,replication client on *.* to 'slave'@'192.168.154.%' identified by 'slave';
Query OK, 0 rows affected (0.06 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.00 sec)
2）从节点：
[root@node3 ~]# vim /etc/my.cnf
innodb_file_per_table=1
skip_name_resolve
log-bin=slave-bin
relay-log=relay-bin
server_id=2
read_only=1
relay_log_purge=0
[root@node3 ~]# service mysqld restart
[root@node4 ~]# vim /etc/my.cnf
innodb_file_per_table=1
skip_name_resolve
log-bin=slave-bin
relay-log=relay-bin
server_id=3
read_only=1 #开启只读模式
relay_log_purge=0 #关闭自动清理中继日志
[root@node4 ~]# service mysqld restart
设置同步：
mysql> change master to master_host='192.168.154.156',master_user='slave',master_password='slave',master_log_file='master-bin.000001',master_log_pos=106;
Query OK, 0 rows affected (0.03 sec)
mysql> start slave;
Query OK, 0 rows affected (0.01 sec)
mysql> show slave status\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.154.156
Master_User: slave
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: master-bin.000001
Read_Master_Log_Pos: 354
Relay_Log_File: relay-bin.000002
Relay_Log_Pos: 500
Relay_Master_Log_File: master-bin.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 354
Relay_Log_Space: 649
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
1 row in set (0.00 sec)
3）在master节点上创建具有管理权限的账号
mysql> grant all on *.* to 'zwj'@'192.168.154.%' identified by 'zwj';
Query OK, 0 rows affected (0.00 sec)
二 配置集群间的密钥登陆
在node1上：
[root@node1 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.156
[root@node1 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.130
[root@node1 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.154
[root@node1 ~]# ssh 192.168.154.154 'ifconfig' #验证
eth0 Link encap:Ethernet HWaddr 00:0C:29:67:65:ED
inet addr:192.168.154.154 Bcast:192.168.154.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe67:65ed/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26253 errors:0 dropped:0 overruns:0 frame:0
TX packets:42416 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23453164 (22.3 MiB) TX bytes:2514457 (2.3 MiB)
Interrupt:19 Base address:0x2024
在node2上：
[root@node2 ~]# ssh-keygen -t rsa
[root@node2 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.128
[root@node2 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.130
[root@node2 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.154
在node3上：
[root@node3 log]# ssh-keygen -t rsa
[root@node3 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.128
[root@node3 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.156
[root@node3 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.154
在node4上：
[root@node4 ~]# ssh-keygen -t rsa
[root@node4 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.128
[root@node4 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.156
[root@node4 ~]# ssh-copy-id -i ./.ssh/id_rsa.pub root@192.168.154.130
三 安装MHA Manager，在node1上：
[root@node1 ~]# yum install perl-DBD-MySQL -y
[root@node1 ~]# tar -zxf mha4mysql-node-0.56.tar.gz
[root@node1 ~]# cd mha4mysql-node-0.56
[root@node1 mha4mysql-node-0.56]# perl Makefile.PL
[root@node1 mha4mysql-node-0.56]# make
[root@node1 mha4mysql-node-0.56]# make install
[root@node1 mha4mysql-manager-0.56]# yum install perl-DBD-MySQL perl-Config-Tiny perl-Log-Dispatch perl-Parallel-ForkManager perl-Time-HiRes -y #安装MHA Manger依赖的perl模块
[root@node1 ~]# tar -zxf mha4mysql-manager-0.56.tar.gz
[root@node1 ~]# cd mha4mysql-manager-0.56
[root@node1 mha4mysql-manager-0.56]# perl Makefile.PL
[root@node1 mha4mysql-manager-0.56]# make
[root@node1 mha4mysql-manager-0.56]# make install
四 安装MySQL node（在所有MySQL服务器上）
[root@node2 ~]#yum install perl-DBD-MySQL -y
[root@node2 ~]# cd mha4mysql-node-0.56/
[root@node2 mha4mysql-node-0.56]# perl Makefile.PL
[root@node2 mha4mysql-node-0.56]# make
[root@node2 mha4mysql-node-0.56]# make install
五 创建工作目录，配置MHA:
[root@node1 ~]# mkdir -pv /etc/masterha
[root@node1 ~]# vim /etc/masterha/appl.cnf
[server default]
user=zwj
password=zwj
manager_workdir=/etc/masterha/appl
manager_log=/etc/masterha/appl/manager.log
remote_workdir=/etc/masterha/appl
ssh_user=root
repl_user=slave
repl_password=slave
ping_interval=1
[server1]
hostname=192.168.154.156
[server2]
hostname=192.168.154.130
candidate_master=1 #设置为备选的master
[server3]
hostname=192.168.154.154
六 检查SSH连接状态：
[root@node1 ~]# masterha_check_ssh --conf=/etc/masterha/appl.cnf
Wed May 10 00:12:58 2017 - [warning] Global configuration file /etc/masterha_default.cnf not found. Skipping.
Wed May 10 00:12:58 2017 - [info] Reading application default configuration from /etc/masterha/appl.cnf..
Wed May 10 00:12:58 2017 - [info] Reading server configuration from /etc/masterha/appl.cnf..
Wed May 10 00:12:58 2017 - [info] Starting SSH connection tests..
Wed May 10 00:13:15 2017 - [debug]
Wed May 10 00:12:59 2017 - [debug] Connecting via SSH from root@192.168.154.154(192.168.154.154:22) to root@192.168.154.156(192.168.154.156:22)..
Wed May 10 00:13:05 2017 - [debug] ok.
Wed May 10 00:13:05 2017 - [debug] Connecting via SSH from root@192.168.154.154(192.168.154.154:22) to root@192.168.154.130(192.168.154.130:22)..
Wed May 10 00:13:15 2017 - [debug] ok.
Wed May 10 00:13:20 2017 - [debug]
Wed May 10 00:12:58 2017 - [debug] Connecting via SSH from root@192.168.154.130(192.168.154.130:22) to root@192.168.154.156(192.168.154.156:22)..
Wed May 10 00:13:11 2017 - [debug] ok.
Wed May 10 00:13:11 2017 - [debug] Connecting via SSH from root@192.168.154.130(192.168.154.130:22) to root@192.168.154.154(192.168.154.154:22)..
Wed May 10 00:13:20 2017 - [debug] ok.
Wed May 10 00:13:35 2017 - [debug]
Wed May 10 00:12:58 2017 - [debug] Connecting via SSH from root@192.168.154.156(192.168.154.156:22) to root@192.168.154.130(192.168.154.130:22)..
Wed May 10 00:13:15 2017 - [debug] ok.
Wed May 10 00:13:15 2017 - [debug] Connecting via SSH from root@192.168.154.156(192.168.154.156:22) to root@192.168.154.154(192.168.154.154:22)..
Wed May 10 00:13:35 2017 - [debug] ok.
Wed May 10 00:13:35 2017 - [info] All SSH connection tests passed successfully.
七 检查整个复制环境：
[root@node1 ~]# masterha_check_repl --conf=/etc/masterha/appl.cnf
...
192.168.154.156(192.168.154.156:3306) (current master)
+--192.168.154.130(192.168.154.130:3306)
+--192.168.154.154(192.168.154.154:3306)
Wed May 10 00:33:36 2017 - [info] Checking replication health on 192.168.154.130..
Wed May 10 00:33:36 2017 - [info] ok.
Wed May 10 00:33:36 2017 - [info] Checking replication health on 192.168.154.154..
Wed May 10 00:33:36 2017 - [info] ok.
Wed May 10 00:33:36 2017 - [warning] master_ip_failover_script is not defined.
Wed May 10 00:33:36 2017 - [warning] shutdown_script is not defined.
Wed May 10 00:33:36 2017 - [info] Got exit code 0 (Not master dead).
MySQL Replication Health is OK.
八 开启MHA Manager监控：
[root@node1 ~]# nohup masterha_manager --conf=/etc/masterha/appl.cnf > /etc/masterha/appl/manager.log 2>&1 &
[1] 8300
查看MHA Manager监控：
[root@node1 ~]# masterha_check_status --conf=/etc/masterha/appl.cnf
appl (pid:8300) is running(0:PING_OK), master:192.168.154.156
关闭MHA Manager监控：
[root@node1 ~]# masterha_stop --conf=/etc/masterha/appl.cnf
Stopped appl successfully.
[1]+ Exit 1 nohup masterha_manager --conf=/etc/masterha/appl.cnf > /etc/masterha/appl/manager.log 2>&1
九 模拟主库宕机：
[root@node2 ~]# service mysqld stop
Stopping mysqld: [ OK ]
查看slave（node4），可见master已发生变化，
...
mysql> show slave status\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for master to send event
Master_Host: 192.168.154.130
Master_User: slave
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: slave-bin.000003
Read_Master_Log_Pos: 106
Relay_Log_File: relay-bin.000002
Relay_Log_Pos: 251
Relay_Master_Log_File: slave-bin.000003
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。