189 8069 5689
这篇文章给大家介绍centos7 磁盘重新分区怎么创建LVM并格式化，内容非常详细，感兴趣的小伙伴们可以参考借鉴，希望对大家能有所帮助。
目前创新互联已为1000+的企业提供了网站建设、域名、网页空间、网站托管维护、企业网站设计、武汉网站维护等服务，公司将坚持客户导向、应用为本的策略，正道将秉承"和谐、参与、激情"的文化，与客户和合作伙伴齐心协力一起成长，共同发展。
[root@MySQL innodb_log]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/vdb: 322.1 GB, 322122547200 bytes, 629145600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8510d8fb
Device Boot Start End Blocks Id System
/dev/vdb1 2048 209717247 104857600 83 Linux
Command (m for help): n
Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): p
Partition number (2-4, default 2):
First sector (209717248-629145599, default 209717248):
Using default value 209717248
Last sector, +sectors or +size{K,M,G} (209717248-629145599, default 629145599): +160G
Partition 2 of type Linux and of size 160 GiB is set
Command (m for help): n
Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p): p
Partition number (3,4, default 3):
First sector (545261568-629145599, default 545261568):
Using default value 545261568
Last sector, +sectors or +size{K,M,G} (545261568-629145599, default 629145599):
Using default value 629145599
Partition 3 of type Linux and of size 40 GiB is set
Command (m for help): p
Disk /dev/vdb: 322.1 GB, 322122547200 bytes, 629145600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8510d8fb
Device Boot Start End Blocks Id System
/dev/vdb1 2048 209717247 104857600 83 Linux
/dev/vdb2 209717248 545261567 167772160 83 Linux
/dev/vdb3 545261568 629145599 41942016 83 Linux
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@mysql innodb_log]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000be2dd
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 1050623 524288 83 Linux
/dev/vda2 1050624 20971519 9960448 8e Linux LVM
/dev/vda3 20971520 83886079 31457280 5 Extended
/dev/vda5 20973568 83886079 31456256 8e Linux LVM
Disk /dev/mapper/vg01-lv01: 42.4 GB, 42404413440 bytes, 82821120 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/vdb: 322.1 GB, 322122547200 bytes, 629145600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8510d8fb
Device Boot Start End Blocks Id System
/dev/vdb1 2048 209717247 104857600 83 Linux
/dev/vdb2 209717248 545261567 167772160 83 Linux
/dev/vdb3 545261568 629145599 41942016 83 Linux
[root@mysql innodb_log]# fdisk /dev/vdb
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): t
Partition number (1-3, default 3): 2
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): t
Partition number (1-3, default 3): 3
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@mysql innodb_log]# partprobe
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
[root@mysql innodb_log]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000be2dd
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 1050623 524288 83 Linux
/dev/vda2 1050624 20971519 9960448 8e Linux LVM
/dev/vda3 20971520 83886079 31457280 5 Extended
/dev/vda5 20973568 83886079 31456256 8e Linux LVM
Disk /dev/mapper/vg01-lv01: 42.4 GB, 42404413440 bytes, 82821120 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/vdb: 322.1 GB, 322122547200 bytes, 629145600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8510d8fb
Device Boot Start End Blocks Id System
/dev/vdb1 2048 209717247 104857600 83 Linux
/dev/vdb2 209717248 545261567 167772160 8e Linux LVM
/dev/vdb3 545261568 629145599 41942016 8e Linux LVM
pv两个： /dev/vdb2 /dev/vdb3
vg一个对应： /dev/vdb2 /dev/vdb3
lv 一个：160G
[root@mysql innodb_log]# pvs
PV VG Fmt Attr PSize PFree
/dev/vda2 vg01 lvm2 a-- <9.50g 0
/dev/vda5 vg01 lvm2 a-- <30.00g 0
[root@mysql innodb_log]# pvcreate /dev/vdb2
WARNING: ext4 signature detected on /dev/vdb2 at offset 1080. Wipe it? [y/n]: y
Wiping ext4 signature on /dev/vdb2.
Physical volume "/dev/vdb2" successfully created.
[root@mysql innodb_log]# pvcreate /dev/vdb3
Physical volume "/dev/vdb3" successfully created.
[root@mysql innodb_log]# pvs
PV VG Fmt Attr PSize PFree
/dev/vda2 vg01 lvm2 a-- <9.50g 0
/dev/vda5 vg01 lvm2 a-- <30.00g 0
/dev/vdb2 lvm2 --- 160.00g 160.00g
/dev/vdb3 lvm2 --- <40.00g <40.00g
[root@mysql innodb_log]# fdisk -l
Disk /dev/vda: 42.9 GB, 42949672960 bytes, 83886080 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x000be2dd
Device Boot Start End Blocks Id System
/dev/vda1 * 2048 1050623 524288 83 Linux
/dev/vda2 1050624 20971519 9960448 8e Linux LVM
/dev/vda3 20971520 83886079 31457280 5 Extended
/dev/vda5 20973568 83886079 31456256 8e Linux LVM
Disk /dev/mapper/vg01-lv01: 42.4 GB, 42404413440 bytes, 82821120 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/vdb: 322.1 GB, 322122547200 bytes, 629145600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x8510d8fb
Device Boot Start End Blocks Id System
/dev/vdb1 2048 209717247 104857600 83 Linux
/dev/vdb2 209717248 545261567 167772160 8e Linux LVM
/dev/vdb3 545261568 629145599 41942016 8e Linux LVM
[root@mysql innodb_log]# pvs
PV VG Fmt Attr PSize PFree
/dev/vda2 vg01 lvm2 a-- <9.50g 0
/dev/vda5 vg01 lvm2 a-- <30.00g 0
/dev/vdb2 lvm2 --- 160.00g 160.00g
/dev/vdb3 lvm2 --- <40.00g <40.00g
[root@mysql innodb_log]# vgcreate vgdata01 /dev/vdb2 /dev/vdb3
Volume group "vgdata01" successfully created
[root@mysql innodb_log]# vgs
VG #PV #LV #SN Attr VSize VFree
vg01 2 1 0 wz--n- 39.49g 0
vgdata01 2 0 0 wz--n- 199.99g 199.99g
[root@mysql innodb_log]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv01 vg01 -wi-ao---- 39.49g
[root@mysql innodb_log]# lvcreate -L 160G -n lv02 vgdata01
Logical volume "lv02" created.
[root@mysql innodb_log]# lvs
LV VG Attr LSize Pool Origin Data% Meta% Move Log Cpy%Sync Convert
lv01 vg01 -wi-ao---- 39.49g
lv02 vgdata01 -wi-a----- 160.00g
[root@mysql innodb_log]# lvdisplay
--- Logical volume ---
LV Path /dev/vgdata01/lv02
LV Name lv02
VG Name vgdata01
LV UUID d2tSRE-tDF6-zPDV-0ACU-Qz9I-BUJJ-jPRoT1
LV Write Access read/write
LV Creation host, time mysql.novalocal, 2020-02-26 13:11:12 +0800
LV Status available
# open 0
LV Size 160.00 GiB
Current LE 40960
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1
--- Logical volume ---
LV Path /dev/vg01/lv01
LV Name lv01
VG Name vg01
LV UUID pErBl0-TR5d-xPSz-CYfY-hT3V-7FWp-QRPbAf
LV Write Access read/write
LV Creation host, time localhost, 2019-09-16 19:31:11 +0800
LV Status available
# open 1
LV Size 39.49 GiB
Current LE 10110
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 8192
Block device 253:0
[root@mysql innodb_log]# mkfs.ext4 /dev/vgdata01/lv02
mke2fs 1.42.9 (28-Dec-2013)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks
10485760 inodes, 41943040 blocks
2097152 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=2189426688
1280 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872
Allocating group tables: done
Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done
[root@mysql innodb_log]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg01-lv01 39G 4.8G 33G 13% /
devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs 7.8G 0 7.8G 0% /dev/shm
tmpfs 7.8G 8.7M 7.8G 1% /run
tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
/dev/vda1 509M 140M 370M 28% /boot
tmpfs 1.6G 0 1.6G 0% /run/user/0
/dev/vdb1 99G 5.3G 89G 6% /data
overlay 39G 4.8G 33G 13% /var/lib/docker/overlay2/a8b63ab12a60dbd0e16dbbd62dd4aa1d073b6092e35f95f6b59b7f0b57dd4aee/merged
[root@mysql innodb_log]# mkdir /data1
mkdir: cannot create directory ‘/data1’: File exists
[root@mysql innodb_log]# vi /etc/fstab
UUID=fa26d131-a86c-432e-9f59-091033663fdb /vdb1 ext4 defaults 0 0
#
# /etc/fstab
# Created by anaconda on Mon Sep 16 19:31:12 2019
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/vg01-lv01 / ext4 defaults 1 1
UUID=9916da56-b2a1-4df1-9775-24e4103eea3a /boot xfs defaults 0 0
UUID=fa26d131-a86c-432e-9f59-091033663fdb /vdb1 ext4 defaults 0 0
/dev/vgdata01/lv02 /data1 ext4 defaults 0 0
~
~
~
~
"/etc/fstab" 12L, 503C written
[root@mysql innodb_log]# mount /dev/vgdata01/lv02 /data1
[root@mysql innodb_log]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/vg01-lv01 39G 4.8G 33G 13% /
devtmpfs 7.8G 0 7.8G 0% /dev
tmpfs 7.8G 0 7.8G 0% /dev/shm
tmpfs 7.8G 8.7M 7.8G 1% /run
tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
/dev/vda1 509M 140M 370M 28% /boot
tmpfs 1.6G 0 1.6G 0% /run/user/0
/dev/vdb1 99G 5.3G 89G 6% /data
overlay 39G 4.8G 33G 13% /var/lib/docker/overlay2/a8b63ab12a60dbd0e16dbbd62dd4aa1d073b6092e35f95f6b59b7f0b57dd4aee/merged
/dev/mapper/vgdata01-lv02 158G 61M 150G 1% /data1
[root@mysql innodb_log]#
关于centos7 磁盘重新分区怎么创建LVM并格式化就分享到这里了，希望以上内容可以对大家有一定的帮助，可以学到更多知识。如果觉得文章不错，可以把它分享出去让更多的人看到。