189 8069 5689
云计算学习路线教程大纲课件：网络管理基础
====================================================================================
Network interface names
Traditionally, network interfaces in Linux are enumerated as eth0, eth2, eth3, and so on. However, the mechanism which
sets these names can cause changes to which interface gets which name as devices are added and removed.
The default naming behavior in Red Hat Enterprise Linux 7 is to assign fixed names based on firmware, device topology,
and device type.
Interface names have the following characters:
Ethernet interfaces begin with en, WLAN interfaces begin with wl, and WWAN interfaces begin with ww.
The next character(s) represents the type of adapter with an o for on-board, s for hotplug slot, and p for PCI geographic location.
Not used by default but also available to administrators, an x is used to incorporate a MAC address.
Finally, a number N is used to represent an index, ID, or port.
If the fixed name cannot be determined, the traditional names such as ethN will be used.
For example, the first embedded network interface may be named eno1 and a PCI card network interface may be named enp2s0.
The new names make it easier to distinguish the relationship between a port and its name if the user knows both, but the
trade off is that users cannot assume a system with one interface calls that interface eth0.
使用NetworkManager管理网络
网络管理器（NetworkManager）是一个动态网络的控制器与配置系统，它用于当网络设备可用时保持设备和连接开启并激活
默认情况下，CentOS/RHEL 7 已安装网络管理器，并处于启用状态。
device 设备，物理设备 例如enp2s0,virbr0,team0
connection 连接，逻辑设置 指的是一套具体配置方案
多个connection可以应用到同一个device，但同一时间只能启用其中一个connection。
这样的好处是针对一个网络接口，可以设置多个网络连接，比如静态IP和动态IP，再根据需要up相应的connection
NetworkManager提供的工具
nmcli, nmtui, nm-connect-editor
[root@tianyun ~]# nmcli connection add con-name enp2s0-auto autoconnect yes ifname enp2s0 type ethernet
[root@tianyun ~]# nmcli connection add con-name enp2s0-gun autoconnect yes ifname enp2s0 type ethernet ip4 10.10.10.10/24 gw4 10.10.10.254
[root@tianyun ~]# nmcli connection show enp2s0-auto |grep ipv4.me
ipv4.method: auto
[root@tianyun ~]# nmcli connection show enp2s0-gun |grep ipv4.me
ipv4.method: manual
[root@tianyun ~]# ls /etc/sysconfig/network-s/
ifcfg-enp2s0 ifdown-ippp ifdown-TeamPort ifup-ipv6 ifup-Team
ifcfg-enp2s0-auto ifdown-ipv6 ifdown-tunnel ifup-isdn ifup-TeamPort
ifcfg-enp2s0-gun ifdown-isdn ifup ifup-plip ifup-tunnel
[root@tianyun ~]# nmcli connection up enp2s0-auto
[root@tianyun ~]# nmcli connection delete enp2s0-auto
[root@tianyun ~]# nmcli connection modify enp2s0-gun ipv4.method a
[root@tianyun ~]# nmcli connection modify enp2s0-gun ipv4.method m
[root@tianyun ~]# nmcli connection modify enp2s0-gun +ipv4.addresses 20.20.20.20/24
[root@tianyun ~]# nmcli connection modify enp2s0-gun +ipv4.dns 114.114.114.114
[root@tianyun ~]# nmcli connection show enp2s0-gun |grep ipv4.add
ipv4.addresses: 10.10.10.10/24, 20.20.20.20/24
[root@tianyun ~]# vim /etc/sysconfig/network-s/ifcfg-enp2s0
NAME="enp2s0"
DEVICE="enp2s0"
ONBOOT=yes
NETBOOT=yes
BOOTPROTO=none
IPADDR=172.16.120.246
PREFIX=24
IPADDR1=192.168.200.246
PREFIX1=24
GATEWAY=172.16.120.254
DNS1=8.8.8.8
DNS2=114.114.114.114
[root@tianyun ~]# nmcli con reload
[root@tianyun ~]# nmcli con down enp2s0; nmcli con up enp2s0
注：删除自建的连接connection
不使用NetworkManager管理网络
aliyun
[root@aliyun ~]# nmcli connection delete enp2s0-auto
[root@aliyun ~]# systemctl disable NetworkManager
[root@aliyun ~]# systemctl stop NetworkManager
[root@aliyun ~]# systemctl status NetworkManager
● NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; disabled; vendor preset: enabled)
Active: inactive (dead)
[root@aliyun ~]# vim /etc/sysconfig/network-s/ifcfg-eth0
NAME=eth0
DEVICE=eth0
ONBOOT=yes
NETBOOT=yes
BOOTPROTO=none
IPADDR=192.168.122.169
PREFIX=24
TYPE=Ethernet
[root@aliyun ~]# systemctl restart network.service
以下配置跟NetworkManager无关：
a. hosts
[root@tianyun ~]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
119.75.218.70 www.baidu.com
[root@tianyun ~]# getent hosts www.baidu.com
119.75.218.70 www.baidu.com
b. resolv.conf DNS
[root@tianyun ~]# cat /etc/resolv.conf
nameserver 114.114.114.114
[root@tianyun ~]# yum -y install bind-utils
[root@tianyun ~]# host www.sina.com
www.sina.com is an alias for us.sina.com.cn.
us.sina.com.cn is an alias for wwwus.sina.com.
wwwus.sina.com has address 66.102.251.33
基本的网络测试工具
[root@tianyun ~]# ip a
[root@tianyun ~]# ip a s eth0
[root@tianyun ~]# ip route
[root@tianyun ~]# ip neigh
[root@tianyun ~]# hostname
[root@tianyun ~]# ping www.baidu.com
[root@tianyun ~]# ping -c2 www.baidu.com
[root@tianyun ~]# ip -s link show eth0
[root@tianyun ~]# traceroute www.sina.com
[root@tianyun ~]# tracepath www.sina.com
1?: [LOCALHOST] pmtu 1500
1: no reply
2: 11.245.87.126 0.787ms
3: 106.11.130.218 0.387ms
4: 42.120.244.125 0.425ms
5: 150.138.132.157 1.469ms
6: 150.138.128.241 3.546ms asymm 7
7: 202.97.40.241 24.677ms
8: 202.97.24.154 14.197ms
9: 202.97.33.154 18.340ms asymm 10
10: 202.97.90.242 182.632ms
11: 203.14.186.138 193.383ms asymm 13
12: 218.30.41.234 209.543ms asymm 13
13: 66.102.251.33 163.224ms reached
Resume: pmtu 1500 hops 13 back 14
查看设备物理连接的状态
[root@tianyun ~]# ip a
2: enp1s0:
如果在连接禁用 ONBOOT=no 以上的信息不真实
[root@tianyun ~]# ethtool enp1s0
Link detected: no
ports and services
以下为示例服务：
[root@aliyun ~]# yum -y install httpd vsftpd
[root@aliyun ~]# systemctl start httpd
[root@aliyun ~]# systemctl start vsftpd
http 80/tcp
https 443/tcp
ssh 22/tcp
ftp 21/tcp
[root@aliyun ~]# ss -tnl
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 128 :80:*
LISTEN 0 128 :8080:*
LISTEN 0 10 114.215.71.214:53 :
LISTEN 0 10 10.29.89.165:53 :
LISTEN 0 10 127.0.0.1:53 :
LISTEN 0 128 :22:*
LISTEN 0 128 127.0.0.1:953 :
LISTEN 0 128 127.0.0.1:6010 :
LISTEN 0 128 :443:*
LISTEN 0 32 :::21 :::*
LISTEN 0 10 :::53 :::*
[root@aliyun ~]# ss -tnl |grep :80
LISTEN 0 128 :80:*
[root@aliyun ~]# ss -tnl |grep :21
LISTEN 0 32 :::21 :::*
[root@aliyun ~]# ss -atn
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 128 :80:*
LISTEN 0 10 114.215.71.214:53 :
LISTEN 0 10 10.29.89.165:53 :
LISTEN 0 10 127.0.0.1:53 :
LISTEN 0 128 :22:*
LISTEN 0 128 127.0.0.1:953 :
LISTEN 0 128 127.0.0.1:6010 :
ESTAB 0 52 114.215.71.214:22 123.120.38.233:49603
ESTAB 0 0 114.215.71.214:40962 140.205.140.205:80
LISTEN 0 32 :::21 :::*
LISTEN 0 10 :::53 :::*
[root@aliyun ~]# ss -atn |grep :22
LISTEN 0 128 :22:*
ESTAB 0 52 114.215.71.214:22 123.120.38.233:49603
[root@aliyun ~]# ss -atn |grep :80
LISTEN 0 128 :80:*
ESTAB 0 0 114.215.71.214:40962 140.205.140.205:80
a 所有状态，包括 LISTEN
[alice@tianyun ~]$ ss -anu
State Recv-Q Send-Q Local Address:Port Peer Address:Port
UNCONN 0 0 114.215.71.214:53 :
UNCONN 0 0 10.29.89.165:53 :
UNCONN 0 0 127.0.0.1:53 :
UNCONN 0 0 114.215.71.214:123 :
UNCONN 0 0 10.29.89.165:123 :
UNCONN 0 0 127.0.0.1:123 :
UNCONN 0 0 :123:*
UNCONN 0 0 :::53 :::*
UNCONN 0 0 :::123 :::*
[kiosk@foundation0 ~]$ ss -tan |grep :5910
LISTEN 0 5 :5910:*
ESTAB 0 0 172.25.254.250:5910 172.25.254.44:51435
ESTAB 0 0 172.25.254.250:5910 172.25.254.6:40546
ESTAB 0 0 172.25.254.250:5910 172.25.254.18:37780
ESTAB 0 0 172.25.254.250:5910 172.25.254.13:55841
ESTAB 0 0 172.25.254.250:5910 172.25.254.35:36984
ESTAB 0 0 172.25.254.250:5910 172.25.254.9:47342
ESTAB 0 0 172.25.254.250:5910 172.25.254.2:40955
ESTAB 0 0 172.25.254.250:5910 172.25.254.12:50833
ESTAB 0 0 172.25.254.250:5910 172.25.254.36:50854
ESTAB 0 0 172.25.254.250:5910 172.25.254.1:52444
ESTAB 0 0 172.25.254.250:5910 172.25.254.47:39335
ESTAB 10 0 172.25.254.250:5910 172.25.254.14:55833
临时配置网络信息
ip/netmask
gateway
hostname
配置文件：
#vim /etc/sysconfig/network-s/ifcfg-eth0
DEVICE=eth0 设备名称
【NAME="System eth0" 设备名称】 可以不存在
BOOTPROTO=none 启动协议 获取ip地址的方式 static、none ==>静态获取 dhcp 动态
NM_CONTROLLED=no 默认是yes 关闭network-manager
ONBOOT=yes 开机启动
TYPE=Ethernet 以太网类型
HWADDR=00:0c:29:8e:a5:d3 mac地址
IPADDR=172.16.80.252 ip地址
NETMASK=255.255.0.0 掩码
PREFIX =24
NETWORK=172.16.0.0
GATEWAY=172.16.80.1 网关
dns domain name server 域名解析
帮助文档：
#vim /usr/share/doc/inits-9.03.38/sysconfig.txt
网关：网络的关卡(出口)，一般设置到路由器上
IP转发:
临时
永久
net.ipv4.ip_forward = 1
dns ： 域名服务器，其中一种是解析域名到Ip地址
dns配置文件（客户端）
#vim /etc/resolv.conf
nameserver 172.16.70.250
查看mac
#arping 172.16.70.250
扫描ip
#nmap -v -sP 172.16.70.0/24
扫描端口
#nmap -v -A 172.16.70.0/24
重启网络服务:
#systemctl restart network //rhel7
#/etc/init.d/network restart //rhel5/6
#service network restart //rhel5/6
另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。